Dynamometer for motorcycles BPC IV Intertial
Description
250 kg
Max. axle load per step.

Max. test speed
120 km/h.

Patented Design
Distance between roller axes
360 mm.

MOTORCYCLE DYNO BPC IV INERTIAL
The moped inertial dyno is a very useful tool for inspection centres and workshops as it determines power and torque according to the engine speed. It also allows you to diagnose the status of the moped’s speed limiter.
The bench is formed by a steel monocoque frame that houses 2 rollers of 150 mm. mounted on bearings with very low resistance to rotation.
The bench also has a 200 mm flywheel. The speed measurement is obtained through an incremental encoder mounted on the front roller axis. The interlocking of the rear roller in different positions facilitates testing for different wheel sizes.

Standard equipment
- Inertial Power Bench
- Control console
- Electronic control and software
- Remote control for test control
Standard equipment
- Test control by remote control.
- Ryme database (both in network and local mode), which allows to store cards with customer and vehicle data. All the tests carried out are recorded and are easily searchable to be able to compare with new tests.
- Personalized advertising on screen.
- Measurement of speed, time and space.
- Ethernet communication (TCP-IP protocol).
- Measurement of maximum speed during one minute
- Configurable vehicle parameters
- Database that allows you to store files with customer and vehicle data. All tests are recorded and easily searchable.
- Translation module through which the user can translate the program into his own language
We can check the power on scooters, enduros, minibikes, etc…
Machine with which it is possible to reach a high value of inertia thanks to the system of triple roller, two small and another bigger one connected between them. Measuring the scooters as they behave in reality.
It is essential to have a large mass to be able to simulate the acceleration as it really is, so we get the same results as in road tests.
ADVANTAGES: Small, flat and easy to handle equipment, fast and precise measurements and integrated rollers.


Electronics

Better processors
New high-speed processor. Incorporation of auxiliary microprocessors

Increased connections
Ethernet (TCP-IP) / RS-232 WiFi connection on the main board

RAM memory
New memory 16 times faster

Flash memory
New memory 4 times faster

Modular system
All electronics are expandable. Special design for automotive and technical inspection of vehicles designed by Ryme
Technical data
Maximum axle load | 250 Kg |
Maximum test speed | 120 km/h |
Max. power | 25 kw. (34 hp.) Dynamic |
Roller diameter | 150 mm. |
Roller length | 300 mm. |
Inertia Roller Diameter | 200 mm. |
Distance between roller axes | 360 mm. |
Inertia of the rollers | 282 Kg * cm2 |
Mechanics

Epoxy Paint
Powder coated finish for optimum and long lasting protection

Perfect Fit Assembly
Design using Perfect-Fit technology, which guarantees assembly and finish

High Quality Rollers
Rollers with surface treatment to ensure perfect wheel adherence even at high speeds

Robust Geared Motors
Tested for durability to ensure optimum performance of the same
Dimensions
Frame dimensions | 760 x 540 x 220 mm. |
Packed frame dimensions | 800 x 600 x 400 mm. |
Frame weight | 150 Kg |
Weight of the packaged frame | 180 Kg |
Console dimensions | 720 x 420 x 1.850 mm. |
Packaged Console Dimensions | 800 x 600 x 1.580 mm. |
Console weight | 80 Kg |
Weight of the packed console | 100 Kg |
Software

More Productive
Repetition of partial tests

Safer
Ryme applications can encrypt your data, making the system more secure and reliable

More Intuitive
Incorporation of graphic icons. Ryme applications share the same menus

More Compatible
Compatibility with more than 95% of the database management systems on the market

Adapted to Regulations
Adaptation to ISO 21069 with the single-point, two-point and multi-point methods

More Reliable and Accurate
Improvement in the process of calibrating the main board.
Downloads
Download customers
We are here
Calle Merindad de Cuesta Urria, 4, 09001 Burgos
Contact us here
Email: info@ryme.com
Telf: (+34) 947 482 020
About us
Our goal is to develop new products and continuously improve the products we currently have on the market.
Be the first to review “Dynamometer for motorcycles BPC IV Intertial”
250 kg
Max. axle load per step.

Max. test speed
120 km/h.

Patented Design
Distance between roller axes
360 mm.

MOTORCYCLE DYNO BPC IV INERTIAL
The moped inertial dyno is a very useful tool for inspection centres and workshops as it determines power and torque according to the engine speed. It also allows you to diagnose the status of the moped’s speed limiter.
The bench is formed by a steel monocoque frame that houses 2 rollers of 150 mm. mounted on bearings with very low resistance to rotation.
The bench also has a 200 mm flywheel. The speed measurement is obtained through an incremental encoder mounted on the front roller axis. The interlocking of the rear roller in different positions facilitates testing for different wheel sizes.

Standard equipment
- Inertial Power Bench
- Control console
- Electronic control and software
- Remote control for test control
Standard equipment
- Test control by remote control.
- Ryme database (both in network and local mode), which allows to store cards with customer and vehicle data. All the tests carried out are recorded and are easily searchable to be able to compare with new tests.
- Personalized advertising on screen.
- Measurement of speed, time and space.
- Ethernet communication (TCP-IP protocol).
- Measurement of maximum speed during one minute
- Configurable vehicle parameters
- Database that allows you to store files with customer and vehicle data. All tests are recorded and easily searchable.
- Translation module through which the user can translate the program into his own language
We can check the power on scooters, enduros, minibikes, etc…
Machine with which it is possible to reach a high value of inertia thanks to the system of triple roller, two small and another bigger one connected between them. Measuring the scooters as they behave in reality.
It is essential to have a large mass to be able to simulate the acceleration as it really is, so we get the same results as in road tests.
ADVANTAGES: Small, flat and easy to handle equipment, fast and precise measurements and integrated rollers.



Better processors
New high-speed processor. Incorporation of auxiliary microprocessors

Increased connections
Ethernet (TCP-IP) / RS-232 WiFi connection on the main board

RAM memory
New memory 16 times faster

Flash memory
New memory 4 times faster

Modular system
All electronics are expandable. Special design for automotive and technical inspection of vehicles designed by Ryme
Technical data
Maximum axle load | 250 Kg |
Maximum test speed | 120 km/h |
Max. power | 25 kw. (34 hp.) Dynamic |
Roller diameter | 150 mm. |
Roller length | 300 mm. |
Inertia Roller Diameter | 200 mm. |
Distance between roller axes | 360 mm. |
Inertia of the rollers | 282 Kg * cm2 |
Mechanics

Epoxy Paint
Powder coated finish for optimum and long lasting protection

Perfect Fit Assembly
Design using Perfect-Fit technology, which guarantees assembly and finish

High Quality Rollers
Rollers with surface treatment to ensure perfect wheel adherence even at high speeds

Robust Geared Motors
Tested for durability to ensure optimum performance of the same
Dimensions
Frame dimensions | 760 x 540 x 220 mm. |
Packed frame dimensions | 800 x 600 x 400 mm. |
Frame weight | 150 Kg |
Weight of the packaged frame | 180 Kg |
Console dimensions | 720 x 420 x 1.850 mm. |
Packaged Console Dimensions | 800 x 600 x 1.580 mm. |
Console weight | 80 Kg |
Weight of the packed console | 100 Kg |
Software

More Productive
Repetition of partial tests

Safer
Ryme applications can encrypt your data, making the system more secure and reliable

More Intuitive
Incorporation of graphic icons. Ryme applications share the same menus

More Compatible
Compatibility with more than 95% of the database management systems on the market

Adapted to Regulations
Adaptation to ISO 21069 with the single-point, two-point and multi-point methods

More Reliable and Accurate
Improvement in the process of calibrating the main board.
Downloads
Download customers
We are here
Calle Merindad de Cuesta Urria, 4, 09001 Burgos
Contact us here
Email: info@ryme.com
Telf: (+34) 947 482 020
About us
Our goal is to develop new products and continuously improve the products we currently have on the market.
Reviews
There are no reviews yet.